Primary Features & Substrates

Features

• Color matched to Mimaki SS21 ink, avoiding the need to profile in most situations.
• Low odor formulation.
• Improved resistance to alcohol, scratching and abrasion.
• Enhanced drying characteristics to accommodate faster print speeds
• Long term exterior performance with proven resistance to the effects of UV.
• High impact, high intensity colors equivalent to the original OEM ink set.

Nazdar 130 Series inks are available in CMYK LC LM, LK, Orange and can be used in conjunction with Mimaki SS21 Metallic and White. It is also fully compatible with Nazdar 133 Series.

Substrates

• Self-Adhesive, flexible and pressure sensitive vinyl.
• Banner Material
• Blue back paper
• Backed mesh

Ink Handling

All personnel mixing and handling these products must wear gloves and eye protection. Clean up all spills immediately. If ink does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or flush solution). Wash the affected area with soap and water. Consult the Nazdar® 130 Series Material Safety Data Sheet for further instructions and warnings.

Ink Changeover

When changing from Mimaki SS21 original ink cartridges or Nazdar 133 Series to Nazdar 130 Series cartridges operators should remove the empty cartridge and replace with a Nazdar 130 Series ink cartridge and continue printing. This can be carried out either one color at a time or all colors together.

No ink fills are required.

For conversions from non OEM inks or bulk feed systems please consult www.nazdar.com.

Clean Up

Use item number LWS130FF Flush Solution for the most effective cleanup of ink spills and cleaning of jet assemblies. Avoid contact with skin. Wear approved safety glasses and appropriate gloves when using Maintenance Solution. Consult MSDS for further safety precautions.

Storage/Shelf Life

Storage and transportation of ink and cleaning solutions should be carried out between 5°- 25°C (41°- 77°F). Ink and cleaning solutions should always be kept away from heat, sparks, and flames. If stored or transported at a different temperature, the ink should be allowed to reach room temperature before calibration or printing. This may have an adverse effect on performance and will affect any warranties given by Nazdar®.

Recommended shelf life of this product is 15 months from the date of manufacture when stored under preferred conditions.

Ink Performance

Outdoor Durability

Nazdar® 130 Series Inks are designed for maximum outdoor resistance to color fade and chemical attack caused by the combined effects of UV degradation and environmental pollution.

Each color is formulated with durable long-term outdoor pigments. When Nazdar® 130 Series Inks are used with proper color management, color variance of the original print density will be minimal over a period of 24 months for vertical outdoor exposure.

To ensure the color properties of Nazdar® 130 Series inks do not change during outdoor exposure, it is important to use proven substrates (flexible vinyl and pressure sensitive vinyl) that do not "yellow" or vary from their original white cast when exposed outdoors. All Nazdar® 130 Series Inks are formulated for maximum adhesion to an extensive range of unsupported and pressure sensitive vinyl. Always pretest for acceptable adhesion prior to production.