|
technical data sheet NAZDAR Phosphorescent PowdersPhosphorescent, also referred to as 'Glow in the Dark' or 'Luminescent', Powders are pigments that absorb light and slowly emit a glow over time. The glow is best seen in darkness or under black-light conditions. Depending on the pigment and pigment load in the ink, the glow may last a few minutes or several hours. Nazdar Phosphorescent Pigments are packaged in 1-pound containers and can be used in various UV-curable and solvent-based ink series. |
Rev 2.00 |
User InformationWhile technical information and advice on the use of this product is provided in good faith, the User bears sole responsibility for selecting the appropriate product for their end-use requirements. See full disclaimer at the end of the document. Mesh195-280 tpi (77-110 tpcm) monofilament polyester mesh for most applications Phosphorescent PowdersThe phosphorescent powders may be added to most solvent-based and UV ink series. Add up to 50% by weight to a clear ink. PrintingWhen inks are to be printed over a phosphorescent color, the overprinting ink(s) must be evaluated for intercoat adhesion before proceeding with the production run. To maximize intercoat adhesion, phosphorescent color should be printed as late as possible in the print sequence. Pigments settle in the container; prior to printing, thoroughly mix the ink. Pretest to determine optimum printing performance for a particular set of ink, substrate, screen, press, and curing variables/conditions. StorageStore tightly covered at a temperature between 65°-90°F (18°-32°C). HandlingConsult the Safety Data Sheet for further instructions and warnings. |
Product OfferingPackagingThese powders are available in 1-pound containers. Phosphorescent Powders
|