While technical information and advice on the use of this product is provided in good faith, the User bears sole responsibility for selecting the appropriate product for their end-use requirements. Reference the 'Quality Statement' at the end of this document.

User Information

Mesh

60-110 tpi (24-45 tpcm) monofilament polyester mesh for most applications

Preparation and Printing

The SIPI558 FM Pearl Glitter is intended to be used with mixing clear or metallic mixing clear. Consult the Technical Data Sheet of the ink series to determine printing requirements.

Mix up to 10% powder by weight depending on the ink system, mesh count, adhesion, cure, and desired effect. Test adhesion properties when determining pigment load.

Solvent Based Screen Inks: the SIPI558 FM Pearl Glitter is compatible with most Nazdar solvent based screen inks.

UV Screen Inks: due to the coarse mesh count required for printing the SIPI558 FM Pearl Glitter, only High Performance UV Screen Inks are recommended to use such as the Nazdar UV Ink Series

Note: Cure, adhesion, and intercoat adhesion testing must be carried out prior to production.

Storage

Close tightly and store in a dry area.

Handling

Inhalation is the primary route of exposure and irritation with powders. Therefore, it is recommended that all personnel mixing and handling these products minimize the creation of dust. Consult the FM Pearl Glitter Safety Data Sheet for further instructions and warnings.

Color Card Materials

Special Effects Color Card (CARDSPL): provides screen printed samples and visual reference of the SIPI558 Glitter

Packaging / Availability

Available in one-pound containers.