|
technical data sheet NAZDAR OP Series OP1013 Combo Screen/Coater TCOP1013 has been developed for press application via screen, blanket, tower, dampener, flexo, or converted offset coating units. This topcoat will exhibit excellent flow, leveling properties, resulting in high gloss cured films with excellent flexibility and rub/scuff resistance. |
Rev: 1.10 |
SubstratesPressure sensitive coated paper, paper & board stocks. Properties
Application SuggestionsAn anilox with a BCM range of 5.0 - 8.0 is suggested for flexo applications, with a reverse angle doctor blade. This product is formulated to be press ready and can be printed over Nazdar® Rotary Screen, UV Flexo and Water Base Flexo inks. |
Performance VerificationAfter press/job set up is complete, inspect a portion of the printed web for all applicable and specified properties. These properties include but are not limited to cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Clean UpUse NWC10 EZ Cleaner or suitable solvent. Storage and HandlingProper personal protection equipment and adequate ventilation are required when handling this material. Please consult the Safety Data Sheet for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. |