Google Translate:

翻译 (Chinese Translation)

*Note: Online automatic translations are not always precise. Please refer to the English Technical Data sheet to ensure information accuracy.

technical data sheet

NAZDAR OP Series OP1015 Gloss RC Clear

OP1015 has been developed for roller coat applications. This topcoat will exhibit excellent flow, leveling properties, resulting in high gloss cured films with excellent flexibility and rub/scuff resistance.

Rev: 1.10

Substrates

Pressure sensitive coated papers, vinyl's, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks.

Properties

Target Viscosity 120 -240 cps @25°C
Cure 300 - 600 watts per inch
Gloss 80+ (60°)
Shelf Life 6 months (Unopened containers)
Benzophenone (BP) This product is NOT formulated with Benzophenone.

Application Suggestions

Apply with a Roller Coater.

This product is formulated to be press ready and can be printed over Nazdar® Rotary Screen, UV Flexo and Water Base Flexo inks.

Performance Verification

After press/job set up is complete, inspect a portion of the printed web for all applicable and specified properties. These properties include but are not limited to cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run.

Clean Up

Use NWC10 EZ Cleaner or suitable solvent.

Storage and Handling

Proper personal protection equipment and adequate ventilation are required when handling this material. Please consult the Safety Data Sheet for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use.

technical data sheet

NAZDAR OP Series OP1015 Gloss RC Clear

Rev: 1.10

Nazdar Quality Statement

Nazdar® stands behind the quality of this product. Nazdar® cannot, however, guarantee the finished results because Nazdar® exercises no control over individual operating conditions and production procedures. While technical information and advice on the use of this product is provided in good faith, the User bears sole responsibility for selecting the appropriate product for their end-use requirements. Users are also responsible for testing to determine that our product will perform as expected during the printed item's entire life-cycle from printing, post-print processing, and shipment to end-use.

Any liability associated with the use of this product is limited to the value of the product purchased from Nazdar®.

Nazdar Ink Technologies Offices

Nazdar Ink Technologies - World Headquarters
8501 Hedge Lane Terrace
Shawnee, KS 66227-3290 USA
Toll Free US: 866-340-3579
Tel: +1 913-422-1888
Fax: +1 913-422-2296
E-mail: [email protected]
Technical Support E-mail: [email protected]

Nazdar Limited - EMEA
Battersea Road, Heaton Mersey
Stockport, England SK4 3EE
Tel: + 44 (0)-161-442-2111
Fax: + 44 (0)-161-442-2001
EMEA Technical Service E-mail: [email protected]

Nazdar - Asia Pacific
11 Changi North Street 1
#03-03/04
Singapore 498823
Tel: +65-63854611
Fax: +65-65433690
E-mail: [email protected]