Primary Features & Substrates

Features

• Formulated for use in LED curing printers.
• Formulated for use in multiple applications with adhesion to a wide variety of flexible and rigid substrates.
• Excellent resistance to edge chipping on rigid substrates when used with a knife or router cutter
• Long term exterior performance with proven resistance to the effects of UV degradation and color fade.
• High impact, high intensity colors with extended color gamut
• Consistent color density values
• Heat Bendable

Substrates

• Acrylics
• Reinforced vinyl banner, pressure sensitive vinyl, and window cling
• Styrene
• Rigid Polyethylene
• Fluted Polypropylene
• Foamboard
• Polycarbonate

Adhesion should always be tested as adhesion does depend upon curing conditions, age and manufacturer of substrate.

Ink Handling

All personnel mixing and handling this product must wear gloves and eye protection. Clean up all spills immediately. If ink does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or flush solution). Wash the affected area with soap and water. Consult the Nazdar® 710 Series Safety Data Sheet for further instructions and warnings.

Ink Changeover

Thoroughly clean your current ink system and jet assemblies with LWU7001FF UV Flush Solution. Avoid contact with skin. Wear protective safety glasses and appropriate gloves when handling flush solution. Consult SDS for proper procedures for using Flush solution. Complete conversions procedures available upon request.

When UV inkjet equipment is not in use for extended periods of time the ink should be flushed from the printheads to avoid unwanted in-head curing from stray light sources.

Curing Parameters

Nazdar® 710 Series Ink has been formulated to cure when exposed to a 395 nanometer, 4 watt or higher dual UV-LED lamp system.

Clean Up

For clean-up of ink spills and equipment use LWU7001FF UV Maintenance Solution.

Storage/Shelf Life

Store ink and flush solutions at 18° - 27° C (65° - 80° F). Ink and flush solutions should always be kept away from heat, sparks, and flames. If stored at a different temperature, the ink should be allowed to reach room temperature before calibration or printing. The shelf life of this product is 12 months from the date of manufacture when stored under prescribed conditions.

Ink Performance

Outdoor Durability

When Nazdar® 710 Series Ink is used with the proper color management; color variance will be minimal over a period of 24 months vertical outdoor exposure. Outdoor durability is based on actual outdoor weather testing in the central U.S. on statically mounted substrates. Results for regions with extreme weather conditions or applications other than static signage may vary significantly and should be tested by the end user.

To ensure Nazdar® 710 Series Ink density and hue values do not change during outdoor exposure, it is important to use proven substrates (flexible vinyls and pressure sensitive vinyls) that do not "yellow" or vary from their original white cast when exposed outdoors.

Environmental Operating Parameters

Temperature:

• 66 ° F - 80 ° F [19 ° C - 27 ° C]

Humidity:

• Optimum: 40% - 60% (non-condensing)
• Operational: 30% - 70% (non-condensing)

Nazdar Quality Statement

Nazdar® stands behind the quality of this product. Nazdar® cannot, however, guarantee the finished results because Nazdar® exercises no control over individual operating and production procedures. While technical information and advice on the use of this product is provided in good faith, the user bears sole responsibility for selecting the appropriate product for their end use requirements. Users are also responsible for testing to determine that our product will perform as expected during the printed item's entire life cycle from printing, post print processing, and shipment to end use. This product has been specially formulated for digital printing, and it has not been tested by any other method. Any liability associated with the use of this product is limited to the value of the product purchased from Nazdar®.

Based on information from our raw material suppliers, these products are formulated to contain less than 0.06% lead. If exact heavy metal content is required, independent lab analysis is recommended.

Validated Equipment

Nazdar® 710 Series Ink requires validation for warranty coverage. As printer models become validated, this section will be amended to include the specific makes and models.

Manufacturers Product Offering

All colors listed in the table below are available in 1 liter containers. Contact your Nazdar distributor for product availability and offering.

Inks

Flush