Google Translate:
*Note: Online automatic translations are not always precise. Please refer to the English Technical Data sheet to ensure information accuracy.

technical data sheet

NAZDAR WV Series 60004565WV Heat Resistant Coating

Water Based Heat Resistant Coating

Rev: 1.00

Substrates

PET, styrene, BOPP, polyethylene, Yupo, and other synthetic papers. It can also applied to foil, and materials used to make sachets.

Properties

Target Viscosity 13-20 sec/# 3 Zahn @ 72°F
pH 8.0 -10.0
Drying Sufficient volumes of warm air, medium or short wave I.R.
Shelf Life 6 months (Unopened containers)

Application Suggestions

An anilox with a BCM range of 5.0 - 10.0 is suggested for flexo applications, with a reverse angle doctor blade.

This product is formulated to be press ready and can be printed over Nazdar® Rotary Screen, UV Flexo and Water Base Flexo inks.

Performance Verification

Proper personal protection equipment and adequate ventilation are required when handling this material. Please consult MSDS for details on proper handling of this material.

This product should be stored tightly covered at temperatures between 65°- 90°F (18°- 32°C).

The product should be mixed prior to use.

Clean Up

Use NWC10 EZ Cleaner.

Storage and Handling

Proper personal protection equipment and adequate ventilation are required when handling this material. Please consult the Safety Data Sheet for details on proper handling of this material. This product should be stored tightly covered at temperatures between 65°- 90°F (18°- 32°C).

The product should be mixed prior to use.

technical data sheet

NAZDAR 60004565WV Heat Resistant Coating

Rev: 1.00

Nazdar Quality Statement

Nazdar® stands behind the quality of this product. Nazdar® cannot, however, guarantee the finished results because Nazdar® exercises no control over individual operating conditions and production procedures. While technical information and advice on the use of this product is provided in good faith, the User bears sole responsibility for selecting the appropriate product for their end-use requirements. Users are also responsible for testing to determine that our product will perform as expected during the printed item's entire life-cycle from printing, post-print processing, and shipment to end-use.

Any liability associated with the use of this product is limited to the value of the product purchased from Nazdar®.

Nazdar Ink Technologies Offices

Nazdar Ink Technologies - World Headquarters
8501 Hedge Lane Terrace
Shawnee, KS 66227-3290 USA
Toll Free US: 866-340-3579
Tel: +1 913-422-1888
Fax: +1 913-422-2296
E-mail: [email protected]
Technical Support E-mail: [email protected]

Nazdar Limited - EMEA
Battersea Road, Heaton Mersey
Stockport, England SK4 3EE
Tel: + 44 (0)-161-442-2111
Fax: + 44 (0)-161-442-2001
EMEA Technical Service E-mail: [email protected]

Nazdar - Asia Pacific
11 Changi North Street 1
#03-03/04
Singapore 498823
Tel: +65-63854611
Fax: +65-65433690
E-mail: [email protected]