Google Translate:
*Note: Online automatic translations are not always precise. Please refer to the English Technical Data sheet to ensure information accuracy.

technical data sheet

NAZDAR WV Series NW14302 Waterbase Adhesive

NW14302 is a uniquely formulated general purpose waterbased adhesive for packaging, and paper converting, and cup assembly applications. It exhibits good tack and adhesion.

Rev: 1.00

Substrates

Pressure sensitive vinyl, paper and board.

Properties

Target Viscosity 2000 +/- 500 cps @ 72F
Appearance White in color
pH 4-6
Solids 50 +/- 3%
Drying Sufficient volumes of warm air, medium or short wave I.R.
Shelf Life 6 months (Unopened containers)

Application Suggestions

An anilox with a BCM range of 5.0 - 10.0 is suggested for flexo applications.

Performance Verification

After press/job set up is complete, inspect a portion of the printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion and bond strength. These tests should be performed prior to beginning the full production run.

Clean Up

Clean product with warm water or warm water/soap. For difficult to remove dried adhesive, use polar solvents (alcohols or ketones) or environmentally friendly solvents.

Storage and Handling

Proper personal protection equipment and adequate ventilation are required when handling this material. Please consult SDS for details on proper handling of this material.

The product should be mixed prior to use.

technical data sheet

NAZDAR NW14302 Waterbase Adhesive

Rev: 1.00

Nazdar Quality Statement

Nazdar® stands behind the quality of this product. Nazdar® cannot, however, guarantee the finished results because Nazdar® exercises no control over individual operating conditions and production procedures. While technical information and advice on the use of this product is provided in good faith, the User bears sole responsibility for selecting the appropriate product for their end-use requirements. Users are also responsible for testing to determine that our product will perform as expected during the printed item's entire life-cycle from printing, post-print processing, and shipment to end-use.

Any liability associated with the use of this product is limited to the value of the product purchased from Nazdar®.

Nazdar Ink Technologies Offices

Nazdar Ink Technologies - World Headquarters
8501 Hedge Lane Terrace
Shawnee, KS 66227-3290 USA
Toll Free US: 866-340-3579
Tel: +1 913-422-1888
Fax: +1 913-422-2296
E-mail: [email protected]
Technical Support E-mail: [email protected]

Nazdar Limited - EMEA
Battersea Road, Heaton Mersey
Stockport, England SK4 3EE
Tel: + 44 (0)-161-442-2111
Fax: + 44 (0)-161-442-2001
EMEA Technical Service E-mail: [email protected]

Nazdar - Asia Pacific
11 Changi North Street 1
#03-03/04
Singapore 498823
Tel: +65-63854611
Fax: +65-65433690
E-mail: [email protected]