|
technical data sheet NAZDAR OP Series OP3021 UV IML COATINGOP3021 is a versatile coating offering a smooth lay, gloss and high surface slip. Its high blocking, heat and general chemical and moisture resistance provide an excellent surface for sheeted or cut-and-stack, heat activated adhesive backed, labels for vacuum-pinned blow molded bottles and containers. This coating has excellent rheology characteristics making it ideal for most printing equipment. |
Rev: 1.00 |
SubstratesMay be used on most paper and film based, adhesive backed, blow molding label substrates. PropertiesTarget Viscosity: 200 - 280 cPs @25°C Cure: 225 ft/min with one 300W/in Hg lamp Gloss: 70-80 (60°) Benzophenone (BP): This product is formulated with Benzophenone. BP Free Alternative: Not available Application SuggestionsAn anilox with a BCM range of 5.0 - 10.0 is suggested for flexo applications, with a reverse angle doctor blade. This product is formulated to be press ready and can be printed over Nazdar® Rotary Screen, UV Flexo and Water Base Flexo inks. |
Performance VerificationAfter press/job set up is complete, inspect a portion of the printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Clean UpUse NWC10 EZ Cleaner or suitable solvent. Storage and HandlingProper personal protection equipment and adequate ventilation are required when handling this material. Please consult this product's SDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. |